Image Image Image Image Image

juni 2015 - Rebbl

17

Jun

Delivering Fair Trade Certificates to West Frisian Businesses

  • By ivovandenbrink

Municipalities in the South West of Friesland stimulate local organizations to work on a more sustainable level. A great succes. Rebbl was asked to deliver Fair Trade Certificates in an appropriate manner: with the electric VW T2.

Do you have a special promotion that needs a special car? We’ve got electric old-timers for rent 🙂 Contact us.

oldtimer_elektrische_vw2_bus_promotie_verhuur

oldtimer_elektrische_vw2_bus_verhuur_promotie

There was an issue loading your timed LeadBox™. Please check plugin settings.

17

Jun

Update Chademo Fastcharging for EV Conversions: Allego test coming up

  • By ivovandenbrink

Recently we reported our successful implementation of the Chademo fast charging standard for our DIY EV Conversions. The combination of our Orion BMS, the Chademo inlet and some extra hardware proved to be the right one. The last few weeks we experienced the great comfort of this, especially when the bus was rented for campaigning throughout the Netherlands. Fastned’s next station will be build along the A7, near Tijnje. We did encounter some problems with chargers from the Portugese company Efacec, exploited by the New Motion and Allego. This charger did not communicate with our car so we were not able to charge here. Together with Allego we have planned to do a test in August at their testlab. We will keep you posted.

There was an issue loading your timed LeadBox™. Please check plugin settings.

17

Jun

Video Demo Emrax Bamocar Combination for EV Conversions

  • By ivovandenbrink

To good to be true? No, this is reality and it’s a great setup for high end DIY EV Conversions! The Emrax 228 permanent magnet AC motor, from Enstroj, weighs only 12,3kg, and can deliver 35 to 55 kW continuous output, depending on the RPM and cooling. The peak torque can be 240 Nm for a short period and 100kW peak power. The motor works fine in combination with a Bamocar D3 controller (8,5kg) from Unitek.

In our test you see the Emrax 228, liquid cooled, medium voltage version (upto 450V). We see great potential for electric drive trains where high performance, weight or fastcharging (because of the high voltage) are important. An Emrax 228 liquid cooled motor + resolver cable + I/O cable + Bamocar D3 controller + power cable connectors, will cost around € 7000,- excl. VAT.

 

There was an issue loading your timed LeadBox™. Please check plugin settings.